COMBI 220/6
No longer available
COMBI 220/6
Description
We took the VARI and built an extra working station at the back to bend sheet metal or to punch holes with a punch unit. We even integrated a mini manual back stop in the extra station
The COMBI has a notching capacity of 6mm, a blade length of 220mm and has variable angle between 30 and 140 degrees. Several adjustable stops come standard with a second set of blades.
A rectangular notching unit can be very quickly attached at the back of the machine. 2 adjustments knobs can adjust pressure and speed of the back station.
Bending depth and speed
Utilize the COMBI for bending with the gooseneck punch and multi-V bottom die. The bending depth can be adjusted with an adjustable knob on top of the machine. A mechanical display shows the depth. Bending speed can be adjusted by increasing or decreasing the oil flow to the cylinder.
You can also replace the bending unit with a punch unit to punch round holes, squares, rectangular or oblong shapes.
Standard features:
2 Mechanical sheet hold-downs
Automatic blade gap adjustment
2 Positioning squares with protractor, adjustable 0-90°, fixing holes every 15°
Millimetre scales
60° negative blades to cut stainless steel
1 extra set 30° positive blades to cut stainless steel
Stroke adjuster
Backstop
Foot-pedal control
Transparent safety guard
Large working table
Dovetail slots and scales
Hydraulic Oil
Instruction manual.
Rear workstation:
Table with Dovetail slots
Plexi Safty protection
Adjustable Speed and Pressure
Backstop for bending
Clamps for bending tools
Specifications
Manufacturer | HACO |
Condition | New |