Megafab

for more info: Adrian Dudley / 832.315.0702 / email


P-140 Piranha Ironworker

Standard Features:

Complete Punching Attachment with split dove tail mounting

5 Punch and Die sets

Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear

Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral

Remote Electric Foot Switch that can be connected at either end of the machine

Electric Limit Switches that can be set for stroke control when using foot control

Set of Round Bar Knives [2 way] (customers choice to 2)

Set of 16.625 Plate Shear Knives [4 way]

Set of 20.5" Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625" Plate Shear Knives)

Extra Blank Knife to extend shear to 20.5"

Set of Angle Knives [8 way top] [4 way bottom]

Set of Coper Knives [2 way top] [4 way bottom]

Chip Buckets (2 each)

Extra Oil Filter

Coupling Wrench & 3/8" Allen Wrench

Integral Lifting Lug for instant portability

Throat Depth 12"

Open Height 15-1/2"

CLOSED HEIGHT W/O DIE BLOCK 10-1/4"

STROKE LENGTH 5-1/4"

PLATEN TABLE SIZE (D-W) 14-1/2" X 21"

PUNCH 140 TONS
HOLE SIZE (MAX. MATERIAL) 1-3/4" (1")
MAX. HOLE SIZE (MATERIAL) 5" (5/16")

PLATE SHEAR 20-1/2" LONG
                     1" X 14"
                     3/4" X 18"
                     1/2" X 20" 

ANGLE SHEAR 6" X 6" X 5/8"

BAR SHEAR
ROUND (MIN. TO MAX.) 
1/2" TO 2"
SQUARE (MIN. TO MAX.) 1/2" TO 1-3/8"

COPER-NOTCHER (TONS) 95
(MAX.) 4" X 6" X 3/8"

Bending Attachment (Optional) 12", 24"

Punch End – Strokes Per Minute 30 @ 3/4"
Optional Speed-Up Kit 35 @ 3/4"

WORK STATION HEIGHT APPROX. 44"

HYDRAULICS
PUMP GPM 
15
SYSTEM R/V PSI 3500

FLUID CAPACITY (GAL.) 25

MOTOR STD. 230/460 3 PH. 1800 RPM OPT PHASE & VOLTAGE AVAILABLE 15 HP 3 PH.

Dimensions (Net) W-L-H Approx. 35" x 90" x 68-1/2"

Weight (Net) Lbs. Approx. 6200

PIRANHA Plate Roll